Atlas Copco SmartROC T45--10 User Manual

SmartROC T45-10 6 Daily Maintenance
68
6.2.11CheckHydraulicTank
Condition
p
Themachinemustbestandingonaflatsurfacetoobtainanaccuratereading.
p
Theoiltemperatureshouldbe40°C(104°F).
n
Replacethereturnoilfilter(A)ifthewarningsign isdisplayed.
n
Checkthebreatherfilter(B).
n
Checkthetank(C)andconnectionsforsignsofleakage.
n
Checkthattheoillevelcoversthelowersightglass(D)andhalfoftheuppersight
glass(E).
6.2.12DrainPreFilter
n
Drainwaterfromtheprefilterbyopeningthedrainoutlet(A).

Atlas Copco SmartROC T45--10 Specifications

General

Brand	Atlas Copco
Model	SmartROC T45--10
Category	Drill
Language	English