Atlas Copco SmartROC T45--10 User Manual

SmartROC T45-10 4 Operation
33
4.2.2BasicTramming
WARNING
TippingRisk
Thetippingoverofamachinecancauseseriousinjuryordeath.
u Alwayswearaseatbeltwhenoperatingthemachine.
u Alwayscheckthegroundconditionswherethemachinewillbeoperated.
u Neverexceedthemaximumallowedinclinationanglesforthemachine.
u Nevercombineinclinationanglesfordownward/upward/lateraltramming.
u Adaptthespeedtotheterrain.
WARNING
HighVoltage
Highvoltagecablescancauseseriousinjuryanddamagetoproperty.
u Keepawayfromhighvoltagecables.
Condition
p
Thedieselengineisstarted.
p
Theboomandfeedaresetinthecorrectpositionfortramming.
p
Nopersonispresentinthemachine'sdirectionoftramming.
1.
Setthemodeselector(A)totrammode .
2.
Raisethehydraulicjack(B).
3.
Unlocktrackoscillation(E).
è
TheLEDgoesoffwhentrackoscillationisunlocked.
4.
Usetrackoscillation(F)tocorrectthepositionoftherigtoashorizontalaspossible.
5.
Selecthighspeedorlowspeed(D)dependingonterraincharacteristics.

Atlas Copco SmartROC T45--10 Specifications

General

Brand	Atlas Copco
Model	SmartROC T45--10
Category	Drill
Language	English