Boston Scientific Vercise DBS Series User Manual

The Remote Control
Physician Manual
91098825-02 51 of 337
en
Battery Graphic Description
The Stimulator’s battery is full.
The Stimulator’s battery is ok.
The Stimulator’s battery is low.
Program Selection
A stimulation program is a set of stimulation parameters that determine the patient’s
therapy. A program may apply stimulation to up to four independent stimulation
elds or areas, depending on how the program is set up. For example, one area may
correspond to a right brain target, while another area may correspond to a left brain
target. The Remote Control can store up to four programs – numbered 1 through 4 –
for the patient to select and activate at any time.
Graphic Description
A blank program slot.
A full program slot
The most recently activated or saved program.
The currently selected program slot
A reminder that the P button changes the selected program.
Note: If a patient tries to activate an empty program, nothing will happen.
To select a program:
1. Press the
P button from the Level screen to go to the Program screen.
From the Program screen, each additional P button press selects the next
program number. Press to select the previous program number. The black
highlighted box shows where you are in the cycle. Pressing P from program 4
returns you to the Level screen. Pressing from program 1 also returns you to the
Level screen.

Boston Scientific Vercise DBS Series Specifications

General

Brand	Boston Scientific
Model	Vercise DBS Series
Category	Medical Equipment
Language	English