142
Touch (settings key) to change many of the basic embroidery machine settings.
Understanding the settings
screen
There are four pages in the settings screen. Touch
and in the lower-center of the screen until
the desired page is displayed. The key
appears on all pages.
■ Page 1
1 Touch to save the current settings screen image to
USB media (Refer to page 144).
2 The guides (embroidery frame size, centerpoint
marker, grid and cursor) for the pattern display
area can be specified. (Refer to page 144.)
3 The color information can be switched to the color
name or the thread brand and color number (Refer
to page 145).
4 Units of Measure
Enables the units of measurements that appear in
the screens to be changed. (Refer to page 145.)
5 Basting Distance
Specify the distance between the pattern and the
basting stitching. (Refer to page 96.)
6 Touch to quit specifying settings. The settings are
confirmed and the screen that was displayed
before the settings key was touched appears
again.
■ Page 2
7 Embroidery Background Color/Thumbnail
Background Color
Depending on the color of the embroidery,
changing the background color of the pattern
display area and thumbnails may make them more
visible and easier to select. (Refer to page 146.)
8 Thumbnail Size
Specifies whether the size of image keys that
appear when selecting a pattern from the pattern
list screen are displayed “Small” or “Large”. (Refer
to page 147.)
Using the Settings Key
To Next Page
Loading...
Need help?
General
