GETTING READY
17
1
Optional accessories
The following are available as optional accessories
to be purchased separately from your authorized
Brother dealer.
* We recommend using the optional embroidery table
when using the flat frame or border embroidery
frame.
• The included touch pen can be stored in the
touch pen holder on the back of the
operation panel. Refer to page 15.
1.
2.
3. 4.
5. 6.* 7.
8. 9. 10. 11.
12.
* 13.
14. 15.
No. Part Name Part Code
1
Advanced cap frame 2 set PRCF3 (Americas)
PRCF3:XE2158-001
(Other area)
2
Advanced cap frame 2 PRCFH3 (Americas)
PRCFH3:XE2162-
001 (Other area)
3
Mounting jig PRCFJ2 (Americas)
PRCFJ2:XC7611-
052 (Other area)
4
Cylinder frame set PRCL1 (Americas)
PRCL1:XE2166-001
(Other area)
5
Cylinder frame PRCLH1 (Americas)
PRCLH1:XE2170-
001 (Other area)
6
Flat frame
200 mm (H) × 200 mm (W) (7-7/8
inches (H) × 7-7/8 inches (W))
PRSFLH200
(Americas)
VRFF200: XG3184-
001 (Other area)
7
Embroidery frame (large)
130 mm (H) × 180 mm (W)
(5-1/8 inches (H) × 7-1/8 inches (W))
PRH180 (Americas)
PRH180: XC6285-052
(Other area)
8
Embroidery frame (small)
40 mm (H) × 60 mm (W)
(1-1/2 inches (H) × 2-3/8 inches (W))
PRH60 (Americas)
PRH60: XC6287-052
(Other area)
9 Embroidery card reader SAECR1
10 Embroidery card –
11
Wide table PRSWT1 (Americas)
VRWT1: XG3193-
001 (Other area)
12
Border frame set
100 mm (H) × 180 mm (W) (4 inches
(H) × 7 inches (W))
Embroidery frame holder b
PRSBH1 (Americas)
VRBF180: XG3205-
001 (Other area)
13
Round frame set
(Ø160 mm (6 inches))
(Ø130 mm (5 inches))
(Ø100 mm (4 inches))
Embroidery frame holder c
PRSRHK1
(Americas)
VRRFK1: XG3197-
001 (Other area)
14
Embroidery stand PRNSTD2
(Americas)
VRPRNSTD:
XG3199-001 (Other
area)
15
Clamp frame
VRCLP45B (Europe):
XG3195-001
(Other area)
• Embroidery cards sold overseas are not
compatible with this embroidery machine.
• Visit your nearest authorized Brother dealer
for a complete listing of optional
accessories and embroidery cards available
for your machine.
• Always use accessories recommended for
this machine.
• All specifications are correct at the time of
printing. Please be aware that some
specifications may change without notice.
No. Part Name Part Code
To Next Page
Need help?
General
