Brother 882-T51 User Manual

56
d
Set the main power switch to “{”.
→ The embroidery machine is turned off and the
display and the “Start/Stop” button indicator go off.
• Embroidering can resume after the embroidery
machine is turned on again. Back up several stitches
to overlap the stitching. For details, refer to “Resume
Embroidering After Turning Off the Machine” on
page 89.
■ If the thread breaks while
embroidering
If a problem occurs while embroidering, such as if
the thread breaks, the machine stops automatically.
Re-thread the broken thread, back up several
stitches, and then continue embroidering. For
details, refer to “If the Thread Breaks or the Bobbin
Thread Runs Out While Embroidering” on page 85.

Brother 882-T51 Specifications

General

Brand	Brother
Model	882-T51
Category	PDA
Language	English