90
f
Touch two or three times to go back
two or three stitches.
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the red pointer light indicates the needle
drop point where stitches have already been done.
g
Touch .
→ The embroidering screen appears again.
h
Touch , and then press the
“Start/Stop” button to continue
embroidering.
• The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued.
To Next Page
Loading...
Need help?
General
