1 Press @
to
display
the
joystick
guide.
If [FOCUS] does not appear on the
joystick guide, repeatedly push the
joystick
(T)
toward [NEXT]
to
display
it.
2 Push
the
joystick
(.6.)
toward
[FOCUS].
"MF" appears.
3
Adjust
(~~
)
the
focus
as
necessary
and
press
@.
• The focus will be locked.
Adjust the zoom before you start the
procedure.
Mode switch:
1EJ
•
POINTS
TO
CHECK
• During exposure lock, press @
and push the joystick (.6.) toward
[EXP]
again
to
return the camcorder
to automatic exposure.
Autofocus may not work well on the
following subjects.
In
such case, focus
manually.
• Reflective surfaces
• Subjects with low contrast
or
without
vertical lines
• Fast moving subjects
• Through wet windows
• Night scenes
Manual
Focus
Adjustment
(OJ 21)
Mode switch:
1EJ
(except for the
[IIIFIREWORKS] recording program).
....
~@~
1 Press @
to
display
the
joystick
guide.
If
[EXP]
does not appear on the
joystick guide, repeatedly push the
joystick
(T)
toward [NEXT]
to
display
it.
2 Push
the
joystick
(.6.)
toward
[EXP].
• The exposure adjustment indicator
0-1-0
and the neutral value "±O"
appear on the screen.
• The adjustment range and the
length of the exposure adjustment
indicator will vary depending on the
initial brightness of the picture.
• If you operate the zoom, the
brightness
of
the image may
change.
3
Adjust
(~~
)
the
brightness
of
the
image
as
necessary
and
press
@.
• The exposure adjustment indicator
will change
to
white and the
exposure will be locked.
•
POINTS
TO
CHECK
At times, backlit subjects may appear
too dark (underexposed) or subjects
under very strong lights may appear
too
bright or glaring (overexposed).
To
correct this, you can manually adjust the
exposure.
Manual
Exposure
Adjustment
40
•
Video
To Next Page
Loading...
Need help?
General
