Description main hardware parts
9 Waste toner compartment, to access the waste toner container.
10 Paper module, to hold media.
11 Bulk paper module, to hold media.
12 Special feeder, to manually feed special media, envelopes and tab paper.
13 Output tray, to collect the printed output.
14 Inserter, to feed (preprinted) covers and insert sheets.
15 Professional puncher, to punch holes in the printed output.
16 Perfect binder, to create perfect-bound and trimmed books.
17 High capacity stacker, to stack large piles of output.
18 Folder, to fold the output in various ways.
19 Stacker/stapler, to staple and stack the printed output. A saddle-stitch unit creates sad-
dle-stitched booklets. A punch unit punches printed output.
20 Booklet trimmer, to trim the leading edge of booklets.
21 Two-knife trimmer, to trim the top and bottom-edges of booklets.
Commercial names of paper input optionals
Optional Commercial name
Automatic document feeder Duplex Color Image Reader Unit-H1
Printer cover Printer Cover-F1
Special feeder Stack Bypass-B1
Paper module Multi-Drawer Paper Deck-A1.
Bulk paper module POD Deck Lite-B1
Inserter Document Insertion Unit-M1
For more information, see
Paper input specifications
on page 270.
Commercial names of finishing optionals
Optional Commercial name
Output tray Output Tray-A1
Professional puncher Professional Puncher-C1
Perfect binder Perfect Binder-D1
High capacity stacker High Capacity Stacker-G1
Folder Paper Folding Unit-F1
Stacker / stapler Professional stacker / stapler:
Finisher-AM1 or Saddle Finisher-AM2
Standard stacker / stapler:
Staple Finisher-T1
or Booklet Finisher-T1
Booklet trimmer Booklet Trimmer-D1
4
Main hardware parts
Chapter 2 - Explore the print system 33
imagePRESS C800 Series
To Next Page
Loading...
Need help?
General