Canon imagePRESS C800 Series User Manual

Copy subsets (combined copying)
You can combine different subsets of originals into a copy. With the optional [Page
programming]
function you can define the layout and finishing of each subset.
For more information, see:
About copy jobs on page 55
Copy job settings on page 236
Use page programming on page 107
Before you begin
Read the instructions detailing how to use the automatic document feeder and the glass plate.
(See
Use the automatic document feeder to copy or scan on page 59 or Use the glass plate to
copy or scan on page 61)
Procedure
1.
Touch [Jobs] -> [Copy/Scan] -> [Combined copy job].
2.
Place the first subset into the automatic document feeder or on the glass plate.
3.
Define the settings for the subset and the copy.
4.
Press [Scan].
5.
Place the next subset into the automatic document feeder or on the glass plate.
6.
Define the settings for the subset and the copy.
7.
Press [Scan].
8.
Repeat step 5, 6, and 7 for each following subset.
9.
Touch [Ready] when the last subset is scanned.
10.
Use the optional [Page programming] function to define the layout and finishing of the subsets.
11.
Touch [Ready] to close the [Page programming] function.
12.
Define the destination and enter a name for the copy.
13.
Touch the start button
to start the copy job.
Copy subsets (combined copying)
Chapter 3 - Prepare the jobs 67
imagePRESS C800 Series

Canon imagePRESS C800 Series Specifications

General

Brand	Canon
Model	imagePRESS C800 Series
Category	Printer
Language	English