– 12 –
Carrying in the Outdoor Unit
CAUTION
Handle the outdoor unit carefully, observing the following items.
• To use a forklift or other machinery for loading / unloading in transportation, insert the prongs of the forklift
into the rectangular holes for handling as shown below.
• To lift up the unit, insert a rope capable of bearing the weight of the unit into the rectangular holes shown
below.
Tie the unit from 4 sides.
(Apply padding in positions where the rope comes in contact with the outdoor unit so that no damage is
caused to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
To Next Page
Loading...
Need help?
General
