35
2.1.10 LED
Basic Specifications
There are two LEDs integrated in the terminal, one on the right side for the user notifications and
the other for charging the battery complete notification.
Table 2.15
LED Color Description
Red User notification (alarm), scanning a bar code
Green Scanning a bar code
Blue Connection established via Bluetooth
Orange Connection established via WLAN, WWAN or GPS
Cyan Resume
Right side LED
Magenta ActiveSync connecting
Orange While charging battery pack.
Green Charging battery pack is complete.
Left side LED
Red Charging Error.
Notes:
• The user notification LED on the right side can be used to indicate various notifications by
the OS and other notifications defined by the user.
• All colors available in the LED on the right side are indicated with the System Library.
• The charging battery complete LED on the left side cannot be controlled or manipulated for
its ON/OFF state and color with software.
User Notification (Alarm)
This indication mode is used for alarm notification and etc. The LED can be lit for a specific time
with CeSetUserNotification()API function.
Table 2.16
Operating mode Specification
Blink interval ON in red for 1 second, OFF for 2 seconds
Continuous ON time ON for 30 minutes (OFF when VDET is detected.)
Note:
Indication for scanning a bar code has the priority over other indications.
Scanning
This is used for notification of a scanning result which is controlled with the System Library.
Table 2.17
Operating mode Specification Attribute
Scanning complete ON in green for a specified period of time, then OFF. L_SCANOK
Scanning in error ON in red for a specified period of time, then OFF. L_SCANERR
To Next Page
Loading...
Need help?
General
