36
Bluetooth Connection Status
This is used for notification of Bluetooth connection establishment status which is controlled with
the System Library.
Table 2.18
Operation mode Specification Attribute
Bluetooth established ON in blue for 1 second, OFF for 2 seconds L_BT
Note:
Indication for scanning a bar code has the priority over other indications.
WLAN Connection Status
This is used for notification of WLAN connection establishment status which is controlled with
the System Library.
Table 2.19
Operation mode Specification Attribute
WLAN established ON in orange for 1 second, OFF for 2 seconds L_WLAN
Note:
Indication for scanning a bar code has the priority over other indications.
User Definition
This indication mode is used for other notifications freely defined by the user. The ON/OFF state
and color to be lit can be controlled with the System Library.
Table 2.20
Operation mode Specification
Color selection from red, green, blue, orange, cyan and magenta. User definition
Programmable for ON and OFF time periods
Continuous ON time period 30 minutes (OFF when VDET is detected)
Note:
Indication for scanning a bar code has the priority over other indications.
The functions of the System Library relevant to the User Definition are as follows.
SysSetLED
: Sets up “Enable” or “Disable” for turning on the LED.
SysGetLED
: Retrieves “Enable” or “Disable” status for turning on the LED.
To Next Page
Loading...
Need help?
General
