chapter 5000
page 37
1,2 - 2,0 t A.C.
SERVICE MANUAL
Electric
036-0410-07
1 PROGRAM
2 TESTER
3 SAVE
4 RESTORE
5 ALARMS
6 PROGRAM PEDAL
7 MOTOR DATA
CONSOLE FUNCTION GENERAL DESCRIPTION
HOUR METER
The hour meter appears in the second line of the display when the chopper is connected. It shows the real working
hours.
PARAMETER CHANGE
The chopper parameters can be displayed and programmed via the keyboard, in real time and with operating
machine, thereby making it possible to set the chopper easily.
TESTER
It makes it possible to display the state of the chopper analogue and digital values and thereby to have a useful tool
for the analysis of chopper operation and external cables.
SAVE PARAMETER
It makes it possible to store all values relating to the parameters and the chopper hardware configuration into the
console with a program which can be selected from the keyboard.
RESTORE PARAMETER
It makes it possible to program a chopper with the parameters contained in a program generated by a SAVE.
ALARMS
The console features the possibility to read the last five alarm messages stored in the chopper and displayed together
with the time of occurrence, the number of times the alarm was sent and the temperature value at the time of the
alarm.
PROGRAM VACC
It allows to program the accelerator max. stroke.
ROLL 1 = Allows selection of an option or the next menu item
ROLL 2 = Allows selection of an option or the previous menu
item
ENTER = Allow confirmation of selected options
OUT = Retains the current function
PARAM = Allows an increase in the parameters or selects the
type of connected I/O
SET = Allows a reduction in the parameters or selects the
type of connected I/O
CONSOLE DESCRIPTION
KEYBOARD
Description of key functions:
I MAX B.REVERSE
BRAKING COMPENS.
ACCEL. R.BRAKE
MAX SP. SPEED I
S.P. I SPEED II
S.P. II SPEED III
BYPASS FIELD WEAK...
I MOT V.POT.
TEMP. V.BATT.
TEMP. VMN.MOT.
M.SW.TEST
135
ROLL ENTER PARAM.
ROLL OUT SET
246
To Next Page
Loading...
Need help?
General
