5 . MAINTENANCE AND ADJUSTMENTS
5.8
Challenger MT500B EU
5.3 - USER GUIDE
5.3.1 - Engine, fuel and cooling systems
1. Check / Clean dry air filter element(s) (section 5.9).
2. Check radiator coolant level (section 5.10).
3. Clean main radiator and all other cooler element fins
(section 5.10).
4. Observe level of smoke emission from exhaust.
5.3.2 - Electrical system and instruments
5. Check battery condition and electrolyte level.
6. Check tightness of battery connections and battery
safety.
5.3.3 - Front axle and steering
7. Check oil level in front axle and epicyclic drive units
(4WD).
8. Grease drive shaft/front axle universal joints (4WD)
(section 5.6).
9. Lubricate the steering pivots / suspended front axle.
10. Check steering and toe-in adjustment (including tyre
wear and damage).
5.3.4 - Transmission and hydraulics
11. Check transmission / auxiliary hydraulic oil level.
12. Check oil level in the rear final drive units (according to
model).
5.3.5 - Clutch
13. Check the clutch liquid level.
5.3.6 - General
14. Top up cab windscreen washers (section 5.7).
15. Lubricate all points with grease or oil as specified in
the Operator Instruction Book (section 5.6).
To Next Page
Loading...
Need help?
General
