Cisco 7600 Series Module Guide

16-7
Cisco 7600 Series Routers Module Guide
OL-9392-05
Chapter 16 Adaptive Security Appliance Services Module
ASA SM Documentation
Debug commands
ASA SM Documentation
Cisco ASA Series Documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp57916
ASA hardware and software compatibility information is available at:
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
ASA SM compatibility documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp45887
ASA SM hardware documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
ASA SM quick start documentation is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
ASA SM New Features by Release is available at:
http://www.cisco.com/en/US/docs/security/asa/roadmap/asaroadmap.html#wp64793
Requirement Debug Command
To detect the following:
• If SCP messages are dropped between the
Supervisor SP or RP and the linecard
• To check the SCP communication between
the linecard and supervisor
• To check whether the firewall slot is up, about
the VLAN bitlist, and firewall configuration
events
• To check port channel IDB configurations for
the firewall
• To investigate errors of the following kind:
errors in VLAN association, errors in port
channel configurations of the firewall, SCP
errors while initializing the packets, and
invalid events
Use the debug firewall command.
To detect errors that pertain to major or severe
events in the firewall module processes
Use the debug trifecta command.

Cisco 7600 Series Specifications

General

Brand	Cisco
Model	7600 Series
Category	Network Router
Language	English