Cisco 7811 User Manual

CHAPTER 2
Phone Setup
•
Connect Footstand, page 21
•
Adjust the Handset Rest, page 21
Connect Footstand
If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Procedure
Step 1
Insert the curved connectors into the lower slots.
Step 2
Lift the footstand until the connectors snap into the upper slots.
Connecting and disconnecting the footstand may require a little more force than you expect.Note
Step 3
Adjust the angle of the phone.
You cannot adjust the Cisco IP Phone 7811
footstand.
Note
Adjust the Handset Rest
If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
21

Cisco 7811 Specifications

General

Brand	Cisco
Model	7811
Category	IP Phone
Language	English