Cisco 7811 User Manual

Procedure
Step 1
Press Intercom.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an active
call, that call is placed on hold.
Note
Step 2
Listen for the intercom alert tone, then begin speaking.
Step 3
Press Intercom to end the call.
Place a Dialable Intercom Call
Procedure
Step 1
Press Intercom.
Step 2
Enter the intercom code.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an active
call, that call is placed on hold.
Note
Step 3
Listen for the intercom alert tone, then begin speaking.
Step 4
Press Intercom to end the call.
Receive Intercom Call
When you receive an intercom call, you hear an intercom alert tone and your phone autoanswers the call. Any
current call activity that you are engaged in continues simultaneously, but the intercom caller cannot hear
you.
To speak to the intercom caller, press the active Intercom button.
View Phone Information
Phone Information allows you to view the following model information for your phone:
•
Model Number
•
MAC Address
•
Active Load ID
•
IP Address
•
Active Server
•
Stand-by-Server
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
35
Basic Operations
Place a Dialable Intercom Call

Cisco 7811 Specifications

General

Brand	Cisco
Model	7811
Category	IP Phone
Language	English