Cisco 7811 User Manual

Cisco WebDialer
Cisco WebDialer allows you to make calls on your Cisco IP Phone to directory contacts by selecting items
in a web browser.
For more information, contact your system administrator.
Use Cisco WebDialer with Another Online Corporate Directory
Procedure
Step 1
In a web browser, type the address of the Cisco WebDialer-enabled page:
https://[CUCM IP]/webdialer/Webdialer
Step 2
When prompted, enter your user ID and password.
If you are using Cisco WebDialer for the first time, review preferences on the Make Call window.Note
Step 3
Choose a line or a phone.
If you have one phone with a single line, the appropriate phone and line are automatically selected.
If you have more than one phone of the same type, the list identifies the phone by device type and MAC
address. To display the MAC address on your phone, select Applications > Phone Information.
Step 4
Enter the phone number you want to dial, and select Dial.
Step 5
Select Hang up or hang up the handset after your call completes.
Change Cisco WebDialer Preferences
Procedure
Step 1
Initiate a call using Cisco WebDialer to access the Make Call window.
Step 2
Select one of the following options from the Make Call window:
•
Preferred language
•
Preferred device
Step 3
Choose a line or a phone.
If you have one phone with a single line, the appropriate phone and line are automatically selected.
If you have more than one phone of the same type, the list identifies the phone by device type and
MAC address. To display the MAC address on your phone, select Applications > Phone Information.
Note
Step 4
If you have an Extension Mobility profile, select Extension Mobility from the Calling Device drop-down
menu.
Step 5
Ensure that you do not select Do not display call information nor Disable Auto Close.
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
45
Contacts
Cisco WebDialer

Cisco 7811 Specifications

General

Brand	Cisco
Model	7811
Category	IP Phone
Language	English