New or Changed SectionsRevisions
Digit Sequence Examples, on page 73
Edit the Dial Plan on the IP Phone, on page 77
Enable Synchronization of Settings Between the
Phone and the Server, on page 159
Programmable Softkeys, on page 204
Telephony Features for Cisco IP Phone, on page 179
Programmable Softkeys, on page 318
Line Key, on page 308
Vertical Service Activation Codes, on page 298
Feature Buttons and Softkeys, on page 184
Call Feature Settings, on page 324
Updated topics to support Executive-Assistant
Configure the Video Codec, on page 52Updated the topic to support video packetization
Configure Priorities for Voice and Video Data, on
page 233
Added a new topic to support Video RTP
ToS(Voice/Video data priorities)
Telephony Features for Cisco IP Phone, on page 179
Network Settings, on page 321
Updated topics to support Video RTP
ToS(Voice/Video data priorities)
Acoustic Settings, on page 166
Configure Acoustic Settings, on page 166
Added a new topic to support Audio Settings
(Acoustic)
Telephony Features for Cisco IP Phone, on page 179Updated topics to support Audio Settings (Acoustic)
New and Changed for Firmware Release 11.1(2)
New or Changed SectionsFeature
Reverse Name Lookup for Incoming and Outgoing
Calls, on page 152
Enable and Disable Reverse Name Lookup, on page
153
Control the Look Up of Caller Names for Incoming
and Outgoing Calls
Important Headset Safety Information, on page 98
Third Party Headsets, on page 102
Headset Configuration on Your Phone, on page 103
Cisco Headset 531 and Cisco Headset 532
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
5
New and Changed Information
New and Changed for Firmware Release 11.1(2)