Cisco 8861 Administration Guide

• If a user enters rdeial;newcall;cfwd (redial has been misspelt), the key list is not updated
and the user does not see any change on the LCD.
• If a user enters redial;newcall;cfwd;delchar, the user will not see a change on the LCD,
as the delchar softkey is not allowed in the Idle Key List. Hence, this is an incorrect configuration
of the programmable softkey list.
• PSK1:
fnc=sd;ext=5014@$PROXY;nme=sktest1
In this example, we are configuring a softkey on a phone as a speed dial number for extension 5014
(sktest1).
Note
You can also configure an XML service on the programmable soft key. Enter the string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 5 Click Submit All Changes.
Programmable Softkeys
Available Phone StatusDefinitionKey LabelKeyword
IdleLogs user in to Automatic Call
Distribution (ACD).
Agt signinacd_login
IdleLogs user out of ACD.AgtSignOutacd_logout
RingingAnswers an incoming call.Answeranswer
IdleChecks the ACD status.Agt Statusastate
IdleDenotes that a user who is logged in to
an ACD server has set his status as
available.
Availavail
Shared-Active, Shared-HeldAllows another user to interrupt a shared
call.
Bargebarge
Shared-ActiveAllows another user to interrupt a shared
call with the mic disabled.
BargeSilentbargesilent
Connected
Connected Video
Performs a blind call transfer (transfers
a call without speaking to the party to
whom the call is transferred). Requires
that Blind Xfer Serv is enabled.
BlindXferbxfer
Dialing InputCalls the selected item in a list.Callcall (or dial)
ProgressingShow call informationCall Infocall info
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
204
Cisco IP Phone Administration
Programmable Softkeys

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English