Cisco Aironet 340 Series User Manual

5-19
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Chapter 5 Configuring the Client Adapter
Using Host-Based EAP
Step 2 Make sure Trusted Authorities appears in the Certificate drop-down menu.
Step 3 Tap the Import button.
Step 4 The Certificate Manager Open screen appears (see Figure 5-5).
Figure 5-5 Certificate Manager Open Screen
Step 5
Tap the CA certificate file.
Step 6 The Certificate Manager screen reappears with the name of the CA certificate server listed in the middle
of the screen.
Step 7 Tap OK to close the Certificate Manager.
Obtaining a User Certificate
If you are planning to use EAP-TLS authentication on a PPC 2002 device, follow the steps below to
import the user certificate.
Note As an alternative to the procedure below, you can use the Certificate Manager to import a user certificate.
To do so, follow the steps in the “Obtaining a CA Certificate” section above, but make sure My
Certificates (not Trusted Authorities) appears in the Certificate drop-down menu in Step 2 and tap the
user certificate file (not the CA certificate file) in Step 5.
Step 1 Make sure that your Windows CE device has an ActiveSync link to a laptop or PC that is on the same
network as the certificate server you want to use.
Step 2 Select Start > Programs > Cisco > Enroll. The Certificate Enrollment screen appears (see Figure 5-6).

Cisco Aironet 340 Series Specifications

General

Brand	Cisco
Model	Aironet 340 Series
Category	Adapter
Language	English