3-5
Catalyst 3650 Switch Hardware Installation Guide
OL-29734-01
Appendix 3 Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI
Step 1 Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it.
Step 2 Connect the USB cable to the PC and the switch console port. The USB console port LED turns green,
and the Found New Hardware wizard is displayed. Follow the instructions to complete the driver
installation.
Uninstalling the Cisco USB Driver for Microsoft Windows
Use the Windows Add or Remove Programs utility or the setup.exe file:
• Uninstalling the Cisco USB Driver for Microsoft Windows Using the Add or Remove Programs
Utility
• Uninstalling the Cisco USB Driver for Microsoft Windows Using the Setup.exe Program
Uninstalling the Cisco USB Driver for Microsoft Windows Using the Add or Remove Programs Utility
• Uninstalling the Cisco Microsoft Windows XP USB Driver
• Uninstalling the Cisco Microsoft Windows Vista and Microsoft 7 USB Driver
Uninstalling the Cisco Microsoft Windows XP USB Driver
Note Disconnect the switch console terminal before uninstalling the driver.
Step 1 Choose Start > Control Panel > Add or Remove Programs.
Step 2 Select Cisco Virtual Com and click Remove.
Step 3 When the Program Maintenance window is displayed, click the Remove radio button. Click Next.
Uninstalling the Cisco Microsoft Windows Vista and Microsoft 7 USB Driver
Note Disconnect the switch console terminal before uninstalling the driver.
Step 1 Choose Start > Control Panel > Uninstall or change a program.
Step 2 Select Cisco Virtual Com and click Uninstall.
Step 3 When the Programs and Features window is displayed, click Ye s to confirm.
To Next Page
Loading...
Need help?
General