EasyManuals Logo
Home>Cisco>Network Router>cBR Series

Cisco cBR Series Hardware Installation Guide

Cisco cBR Series
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
interface TenGigabitEthernet4/1/6,
interface TenGigabitEthernet4/1/7,
interface TenGigabitEthernet5/1/0,
interface TenGigabitEthernet5/1/1,
interface TenGigabitEthernet5/1/2,
interface TenGigabitEthernet5/1/3,
interface TenGigabitEthernet5/1/4,
interface TenGigabitEthernet5/1/5,
interface TenGigabitEthernet5/1/6,
interface TenGigabitEthernet5/1/7,
c) Add HundredGigE interfaces configuration based on the network topology, for example:
interface HundredGigE4/1/0
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 10 mode active
end
interface HundredGigE4/1/1
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 11 mode active
end
interface HundredGigE5/1/0
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 10 mode active
end
interface HundredGigE5/1/1
mtu 2000
no ip address
load-interval 30
plim qos input map ip dscp-based
plim qos input map ip dscp 40 queue strict-priority
plim qos input map mpls exp 5 queue strict-priority
cdp enable
service-policy output parent-egress-to-core
channel-group 11 mode active
end
d) Modify routing configuration, L2VPN configuration, passive interface configuration etc. as needed. For example.
search for TenGigabitEthernet in previous configuration and replace with HundredGigE.
e) Modify the bootvar to the correct value.
boot system bootflash:<image_name>
Cisco Converged Broadband Routers Hardware Installation Guide
136
Installing the Supervisor in the Cisco cBR Chassis
Backup the Configuration and IOS Code

Table of Contents

Other manuals for Cisco cBR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco cBR Series and is the answer not in the manual?

Cisco cBR Series Specifications

General IconGeneral
BrandCisco
ModelcBR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals