Procedure
Step 1
Log in to your User Options web pages.
Step 2
From the drop-down menu, choose User Options > Device.
Step 3
You can set the following options:
•
Do Not Disturb: Set to enable/disable DND.
•
DND Option: Choose either Call Reject (to turn off all audible and visual notifications) or Ringer Off
(to turn off only the ringer).
•
DND Incoming Call Alert (applies to either DND option set): Set the alert to beep only, flash only,
disable the alert, or choose “None” (to use the “Alert” setting configured by your system administrator).
Hunt groups
If your organization receives a large number of incoming calls, you may be a member of a hunt group, which
includes a series of directory numbers that share the incoming call load. When the first directory number in
the hunt group is busy, the system hunts for the next available directory number in the group and directs the
call to that phone.
When you are away from your phone, you can prevent hunt group calls from ringing your phone by logging
out of hunt groups.
Logging out of hunt groups does not prevent non-hunt-group calls from ringing your phone.
Sign in and out of hunt groups
Procedure
Step 1
Tap Sign In. You are now signed into the Hunt Group.
Step 2
Tap Sign Out.
Active call movement
You can switch active calls between the desktop phone and your mobile phone or other remote destination.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
46 OL-28931-01
Calling tasks
Hunt groups
To Next Page
Loading...
Need help?
General
