Change or create line text label that appears on phone screen
Procedure
Step 1
Select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
(optional) If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
Step 5
In the Line Text Label area, enter a text label.
Step 6
Select Save.
Your phone uses the ASCII Label field if the phone does not support double-byte character
sets.
Note
Set up phone and access list for Mobile Connect
You must add your mobile phone (and any other phones you use) to Cisco Mobile Connect, before you can
place and receive calls using the same directory numbers as your desk phone. These phones are called remote
destinations. You can also define access lists to restrict or allow calls from certain numbers to be sent to your
mobile phone.
Create access list
Procedure
Step 1
Sign in to your User Options web page.
Step 2
Select User Options > Mobility Settings > Access Lists.
Step 3
Select Add New.
Step 4
Enter a name to identify the access list and a description (optional).
Step 5
Select whether the access list will allow or block specified calls.
Step 6
Select Save.
Step 7
Select Add Member to add phone numbers or filters to the list.
Step 8
Select an option from the Filter Mask drop-down list box. You can filter a directory number, calls with
restricted caller ID (Not Available), or calls with anonymous caller ID (Private).
Step 9
If you select a directory number from the Filter Mask drop-down list box, enter a phone number or filter in
the DN Mask field.
You can use the following wildcards to define a filter:
•
X (upper or lower case): Matches a single digit. For example, 408555123X matches any number between
4085551230 and 4085551239.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
OL-28931-01 79
User Options web pages
Set up phone and access list for Mobile Connect
To Next Page
Loading...
Need help?
General
