Cisco DX650 User Manual

Switch between calls on one line
Procedure
Step 1
Highlight the call you want to switch to.
Step 2
Tap Resume.
Any active call is placed on hold and the selected call resumes.
Switch between calls on different lines
Procedure
Step 1
Select the line that you are switching to.
If a single call is holding on the line, the call automatically resumes.
Step 2
If multiple calls are holding, highlight the appropriate call and tap Resume.
Switch from active call to answer ringing call
Procedure
Perform one of the following actions:
•
Tap Answer.
•
If the call is ringing on a different line, select that line.
The phone places the active call on hold and the selected call resumes.
Remove call from hold on current line
Procedure
Step 1
Highlight the appropriate call.
Step 2
Tap Resume.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
OL-28931-01 51
Calling tasks
Multiple calls

Cisco DX650 Specifications

General

Brand	Cisco
Model	DX650
Category	IP Phone
Language	English