Cisco XR 12000 Command Reference

PCI Address 0 2 0
This table describes the significant fields shown in the display.
Table 20: show controllers fabricq errors Field Descriptions
DescriptionField
Number of errors of each type.Error Count
Maximum number of errors of that type that can be
received per second.
Max Rate
Number of times that error has exceeded the Max
Rate.
When the rate is exceeded, the software may try to
restart the fabric queue driver and associated ASICs
or FPGAs to correct the problem.
Rate Exceeded Count
Related Commands
DescriptionCommand
Displays the number of packets dropped to the fabric or from
the fabric on a per-slot basis in the fabric queue driver.
show controllers fabricq drop, on page 99
Displays output from the fabric statistics associated with the
fabric queue driver.
show controllers fabricq frfab, on page 105
Displays the fabric output service statistics associated with the
fabric queue driver.
show controllers fabricq output, on page 109
Displays information about the hardware queues of the
performance route processor chopper and assembler FPGAs.
show controllers fabricq queue, on page 112
Displays the hardware registers of the chopper and assembler
FPGAs.
show controllers fabricq registers, on page
115
Displays to fabric statistics associated with the fabric queue
driver.
show controllers fabricq tofab, on page 118
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
104 OL-28456-02
Fabric Management Commands
show controllers fabricq errors

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English