Cisco XR 12000 Command Reference

show critmon trace all
To display information about all traces for a critical monitor, use the show critmon trace all command in
EXEC mode and in administration EXEC mode.
show critmon trace all [file filename original] [hexdump] [last entries] [reverse] [stats] [tailf] [unique]
[verbose] [wrapping] [location {node-id| all}]
Syntax Description
(Optional) Displays a specific file.file
Name of a specific file.
filename
Specifies the original location of the file.original
(Optional) Displays traces in hexadecimal format.hexdump
(Optional) Displays trace information for a specific
number of entries
last
Number of entries. Replace entries with the
number of entries you want to display. For
example, if you enter 5, the display shows the last
5 entries in the trace data. The range is from 1 to
4294967295.
entries
(Optional) Displays the latest traces first.reverse
(Optional) Displays the statistics in the command
output.
stats
(Optional) Displays the new traces as they are
added in the command output.
tailf
(Optional) Displays the unique entries with counts
in the command output.
unique
(Optional) Displays the information for internal
debugging in the command output.
verbose
(Optional) Displays the wrapping entries in the
command output.
wrapping
(Optional) Specifies a node. The node-id argument
is entered in the rack/slot/module notation.
location
node-id
Specifies all locations.all
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 323
Watchdog Commands
show critmon trace all

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English