show controllers fabricq frfab
To display output from the fabric statistics associated with the fabric queue driver, use the show controllers
fabricq frfabcommand in administration EXEC mode.
show controllers fabricq frfab [detail| trace options] [location node-id]
Syntax Description
(Optional) Displays detailed statistical information.detail
(Optional) Displays detailed fabric queue driver trace information for a specific node.
Replace the options argument with one or more of the following keywords or keyword
arguments to specify the type and format of trace information displayed:
• error—Includes tofab error trace information in the command output.
• file word original—Displays trace information for a specific file.
• hexdump—Displays trace information in hexadecimal format.
• last entries —Displays trace information for a specific number of entries. Replace
the entries argument with the number of entries you want to display. For example,
if you enter 5 , the display shows the last 5 entries in the trace data.
• packet—Includes packet trace information in the command output.
• payload—Includes payload trace information in the command output.
• reverse —Displays the latest traces first.
• stats—Includes trace statistics in the command output.
• tailf—Includes new traces as they are added in the command output.
• unique—Includes unique trace entries with counts in the command output.
• verbose—Includes internal debugging information in the command output.
• wrapping—Includes wrapping entries in the command output.
trace options
(Optional) Displays statistical information for the designated node. The node-id argument
is entered in the rack/slot/module notation.
location
node-id
Command Default
From fabric statistics are displayed for all route processors (RPs) on the router
Command Modes
Administration EXEC
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 105
Fabric Management Commands
show controllers fabricq frfab