Cisco XR 12000 Command Reference

Command History
ModificationRelease
This command was introduced.Release 3.2
The trace keyword and options argument were added.
Release 3.6.0
Usage Guidelines
Use the show controllers fabricq frfabcommand to display from fabric statistics. Specifying a location
displays information only if that location is an RP. Use the detail keyword to display detailed output.
The show controllers fabricq frfabcommand is typically used for debugging purposes.Note
Task ID
OperationsTask ID
read, writeroot-system
Examples
The following is sample output from the show controllers fabricq frfabcommand for location 0/1/CPU0:
RP/0/0/CPU0:router# admin
RP/0/0/CPU0:router(admin)# show controllers fabricq frfab location 0/1/CPU0
Location 0/1/0:
From Fabric Stats:
-------------------
Slot Rx-pkts Rx-TH-pkts Rx-dropped
1 0 3928 0
2 0 37309 0
3 0 43306 0
4 0 42681 0
5 0 35063 0
From Fabric Packet per Queue Stats:
-----------------------------------
Packets received in queue 0 - 0
Packets received in queue 1 - 3928
Packets received in queue 2 - 150069
Packets received in queue 3 - 8290
From Fabric Error Stats:
------------------------
Bigger than MTU pkts - 0
Corrupted pkts - 0
SPD pkt count - 0
No IDB drops - 0
IDB queue tail drops - 0
Chan corrupted pkts - 0
First/Last err pkts - 0
Sequence err pkts - 0
Unknown Rx type - 0
Output queue 0 full drops - 0
Output queue 1 full drops - 0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
106 OL-28456-02
Fabric Management Commands
show controllers fabricq frfab

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English