Cisco XR 12000 Command Reference

show tech-support terminal
To automatically run show commands that display information specific to the terminal, use the show
tech-support terminal command in EXEC mode.
show tech-support terminal [location {node-id| all}| page]
Syntax Description
(Optional) Specifies a node.location
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
(Optional) Specifies all locations.all
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the Ctrl-C keys to stop the command output.
page
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
This command generates terminal information that relates to debugging information that can be useful for
Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and
Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
298 OL-28456-02
Tech-Support Commands
show tech-support terminal

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English