Cisco XR 12000 Command Reference

show tech-support l2tp
To automatically run show commands that display information specific to Layer 2 Tunnel Protocol (L2TP)
technical support, use the show tech-support l2tp command inEXEC mode.
show tech-support l2tp {file send-to [background] [compressed| uncompressed]| terminal [page]}
Syntax Description
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
Specifies that the command output is displayed on the terminal.terminal
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl+C keys to stop the command output.
page
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 193
Tech-Support Commands
show tech-support l2tp

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English