Cisco XR 12000 Command Reference

show controllers pse
To display packet switching engine (PSE) information in the egress or the ingress stage, use the show
controllers pse egress command in EXEC mode.
show controllers pse {egress| ingress} {gather| precam| statistics}
Syntax Description
Displays gather stage programming information.gather
Displays precam stage programming information.precam
Displays microcode statistics.statistics
Command Default
No default behavior or values
Command Modes
EXEC
Administrator EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
Task ID
OperationsTask ID
readinterface
readdrivers
Examples
The following command shows how to use the show controllers pse command:
RP/0/0/CPU0:router# show controllers pse egress gather
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 21
ASIC Driver Commands
show controllers pse

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English