Cisco XR 12000 Command Reference

show imds interface brief
To display interface information for the interface manager distribution server (IMDS), use the show imds
interface brief command in EXEC mode.
show imds interface brief
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Use the show imds interface briefcommand to display IMDS interface information. Use the command output
to determine if the state, encapsulation being used, maximum transmission unit (MTU), and interface handle
(ifhandle) for each interface are as expected.
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows the output of the show imds interface briefcommand:
RP/0/0/CPU0:router show imds interface brief
IMDS BRIEF INTERFACE DATA (Node 0x201)
handle name flags state mtu encap
---------- ----------------------- ------ ----------- -------- ---------------
0x00080000 FINT0/RP0/CPU0 0x0007 up 8000 91 (fint_base)
0x00080010 Null0 0x100ab up 1500 17 (null)
0x00080020 MgmtEth0/RP0/CPU0/0 0x1002f up 1514 30 (ether)
0x00080030 Loopback0 0x100ab up 1514 16 (loopback)
0x00080050 Bundle-POS24 0x104ab up 4474 14 (hdlc)
0x00080070 Bundle-Ether28 0x104ab up 1514 30 (ether)
0x00080090 Bundle-Ether28.1 0x10cab up 1500 107 (dot1q)
0x000800b0 Bundle-Ether28.2 0x10cab up 1500 107 (dot1q)
0x000800d0 Bundle-Ether28.3 0x10cab up 1500 107 (dot1q)
0x01180000 FINT0/1/CPU0 0x0007 up 8000 91 (fint_base)
0x01180020 GigabitEthernet0/1/5/0 0x1002f up 1514 30 (ether)
0x01180040 GigabitEthernet0/1/5/1 0x1002f up 1514 30 (ether)
0x01180060 GigabitEthernet0/1/5/2 0x1002f up 1514 30 (ether)
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 47
Troubleshooting Commands
show imds interface brief

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English