Cisco XR 12000 Command Reference

show tech-support igmp snooping
To automatically run show commands that display debugging information specific to igmp snooping, use
the show tech-support igmp snooping command in the EXEC mode.
show tech-support igmp snooping [file send-to] [location node-id] [terminal]
Syntax Description
(Optional) Specifies that the command output is saved to a specified file.file
(Optional) Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
send-to
(Optional) Specifies a node.location
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
Specifies that the command output is displayed on the terminal.terminal
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop for
page breaks).
Press the Ctrl+C keys to stop the command output.
page
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 181
Tech-Support Commands
show tech-support igmp snooping

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English