Cisco XR 12000 Command Reference

show controllers plim asic summary
To display summarized physical layer interface module (PLIM) ASIC information for a specific node or
interface, use the show controllers plim asic command in EXEC mode.
show controllers plim asic summary [location node-id]
Syntax Description
Identifies the location of the node whose PLIM ASIC information you want to display.
The node-id argument is expressed in the rack/slot/module notation.
Use the show platform command to see the location of all nodes installed
in the router.
Note
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Task ID
OperationsTask ID
readinterface
readroot-system
Examples
The following example shows how to display summarized PLIM ASIC information for all locations:
RP/0/0/CPU0:router# show controllers plim asic summary
Node: 0/1/CPU0
--------------------------------------
Instance# 0 Summary info:
--------------------------------------
Name : PLASPA Version : 2
Port 0
Jacket slot: 1 SPA type : SPA_NAME_UNKNOWN
Port 1
Jacket slot: 3 SPA type : SPA_NAME_UNKNOWN
Port 2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
18 OL-28456-02
ASIC Driver Commands
show controllers plim asic summary

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English