Cisco XR 12000 Command Reference

show netio db
To display Network Input and Output (Netio) database information for an interface, use the show netio db
command in EXEC mode.
show netio db {caps | dll namedll-name| proto} [location node-id]
Syntax Description
Displays the capsulations in the Netio database.caps
Displays the dlls loaded in the Netio database.dll
(Optional) Specifies a DLL name.
namedll-name
Displays the protocol in the Netio database.proto
(Optional) Displays Netio database information for a specified node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
No modifications.Release 3.9.0
No modifications.Release 4.0.0
Usage Guidelines
Task ID
OperationTask ID
readcisco-support
Examples
The following example shows the output of the show netio db command.
RP/0/0/CPU0:router# show netio db caps location 0/1/0
Capsulation (ID) Load Count DLL Name Refcount
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
54 OL-28456-02
Troubleshooting Commands
show netio db

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English