Cisco XR 12000 Command Reference

show tech-support mpls ldp
To automatically run show commands that display information specific to Multiprotocol Label Switching
(MPLS) Label Distribution Protocol (LDP) debugging, use the show tech-support mpls ldp command in
EXEC mode.
show tech-support mpls ldp {file send-to [background] [compressed| uncompressed]| terminal [page]|
location node-id}
Syntax Description
Specifies that the command output is saved to a
specified file.
file
Name of the file. The following valid options are
listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in
the background.
background
(Optional) Displays compressed command
output.
compressed
(Optional) Displays the command output with
no compression.
uncompressed
Specifies that the command output is displayed
on the terminal.
terminal
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 213
Tech-Support Commands
show tech-support mpls ldp

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English