Cisco XR 12000 Command Reference

show tech-support multicast
To automatically run show commands that display information specific to multicast-related information, use
the show tech-support multicast command in EXEC mode.
show tech-support multicast [address-family| classic] [group group-address] {terminal [page]| file send-to}
[background| compressed| uncompressed] [source source address] [location node-id] [rack] [vrf vrf-name]
Syntax Description
(Optional) Collects address family specific information. It can be either ipv4
or ipv6.
address-family
(Optional) Retrieves multicast related information using the non-fast method.classic
(Optional) Specifies the multicast group address.group
(Optional) Address or name of the multicast group. An address is a multicast
IP address in four-part dotted-decimal notation. A name is as defined in the
Domain Name System (DNS) hosts table.
group-address
(Optional) Displays the command output on the terminal.terminal
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
page
(Optional) Specifies that the command output is saved to a specified file.file
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 229
Tech-Support Commands
show tech-support multicast

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English