Cisco XR 12000 Command Reference

show tech-support aps
To automatically run show commands that display debugging information related to automatic protection
switching (APS), use the show tech-support aps command in the EXEC mode. This command collects
APS traces and sonet local traces across all locations and also show controller and show aps commands
for all ports and groups.
show tech-support aps file send-to [group| show-only] [location node-id]
Syntax Description
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
compactflash: filename
•
disk0: filename
•
disk1: filename
•
flash: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
nvram: filename
•
rcp: filename
•
slot0: filename
•
slot1: filename
•
tftp: filename
send-to
(Optional) Displays the show group commands with no trace for APS debugging.group
(Optional) Displays the show commands with no trace for APS debugging.show-only
(Optional) Specifies that the command output is displayed on the terminal.terminal
(Optional) Specifies a node.location
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
node-id
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 131
Tech-Support Commands
show tech-support aps

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English