Cisco XR 12000 Command Reference

Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
Use the show tech-support aps command to run show commands that display APS debugging information.
This command generates information that can be useful for Cisco Technical Support representatives when
troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page
iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
Task ID
OperationsTask ID
readbasic-services
Examples
The following example shows a truncated output of the show tech-support aps command:
RP/0/0/CPU0:router# show tech-support aps show-only terminal
-------------------------------------------------------------------------------
show tech-support aps
-------------------------------------------------------------------------------
---------------------------------- show aps -----------------------------------
no aps group found
------------------------------- show aps agents -------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
132 OL-28456-02
Tech-Support Commands
show tech-support aps

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English