CITROEN C3 2002 User Manual

127
INJECTION
CHECKS : TURBO PRESSURE
Engines : 8HV - 8HY
Tools.
1] Pressure gauge for checking boost pressure : 4073-T.A
[2] Sleeve for checking boost pressure :
Checks
Respect the following test conditions:
- Engine at operating temperature.
- Vehicle in running order.
- Engine under full load.
Preparation.
Remove the clips (1).
Fit the tool [2] in the place of the duct (2).
Couple the sleeve [2] on the pressure gauge [1] using the tube «a».
Mode of operation.
Position tool [1] in the vehicle.
Start the engine.
Engage first gear, start the vehicle.
Engage the gears up to third gear.
Decelerate to an engine speed of 1000 rpm.
Check the pressure : 0,6 ± 0,05 bar (1500 rpm).
Accelerate freely (change from fourth gear to third gear)
Check the pressure: 0,9 ± 0,05 bar (between 2500 and 3500 rpm).
Remove tools [1], [2] at «a».
Reposition the tube (2) and tighten the clip (1).
C5FP0EJC
B1BP2NBD

CITROEN C3 2002 Specifications

General

Brand	CITROEN
Model	C3 2002
Category	Automobile
Language	English