CITROEN C3 2002 User Manual

85
CHECKING AND SETTING THE VALVE TIMING
Engines : 8HY - 8HV
B1EP18XC
Adjusting the timing belt tension (continued).
IMPERATIVE : Never rotate the engine backwards.
WARNING : Do not touch or damage the track of the target of the engine speed sensor (14).
Peg the crankshaft, using tool [3].
Check the position of the tensioner roller (the alignment of the marks «f» and «g» should
be correct).
If this is not the case, repeat the operation to tension the belt.
Peg the camshaft pulley, using tool [2].
IMPERATIVE : Should it be impossible to peg the camshaft, check that the offset bet-
ween the camshaft hole and the pegging hole is not more than 1 mm. If the offset is
too great, repeat the operation.
Remove the pegs [2] and [3].
Refit tool [1] at «a».
Remove the screw (8).
Complete the refitting.
ENGINE

CITROEN C3 2002 Specifications

General

Brand	CITROEN
Model	C3 2002
Category	Automobile
Language	English