B3FP15XC
BRAKE
204
BLEEDING AND FILLING THE BRAKING SYSTEM
Tools.
[1] Generic bleeding apparatus : «LURO» or similar.
Bleeding, refilling.
Draining.
Drain the brake fluid reservoir (1) to the maximum (if necessary, use a clean syringe).
Disconnect the connector (4).
Uncouple the pipe (2).
Unscrew the shaft (3).
Remove the reservoir (1).
- Empty the brake fluid reservoir (1).
- Clean the brake fluid reservoir (1).
Refit:
The brake fluid reservoir (1).
The shaft (3).
Couple the pipe (2).
Reconnect the connector (4).
Filling the braking system.
WARNING : Use only those hydraulic fluids that are approved and recommended.
- Fill the brake fluid reservoir (1).
Bleeding the braking system.
WARNING: During the bleeding operation, take care to maintain the level of brake fluid in the reservoir
and to top it up, using only brake fluid that is clean and clear.