214
AIR
CONDITIONING
C3 vehicles are equipped with an additional protection fuse for the blower, located on the bulkhead inside the vehicle, next to the heater matrix
pipes up to approx. 04/2002.
As a consequence, if a customer reports his blower not working, you should inspect not only the fuse in the engine fusebox, but also the fuse
referred to above.
After 04/2002
, the fuse should be incorporated in the blower itself.
SPECIAL FEATURES : AIR CONDITIONING SYSTEM (R 134.a)
SealsPressure reducer
Special feature: Blower
C5HP18WC C5HP18XD
The inlet (10) and the outlet (9) are equipped with new seals (3) (MANULLI).
Pressure reducer: TGK 2,02/2,7/2 Tons
Evaporator : VALEO 60 mm.
MANULLI calibrated seal (3)
Direction of fitting of the seal (3).
Before fitting the seal, amply lubricate the seal with air conditioning
compressor oil (SP10).