90
EXHAUST SPECIFICATIONS
Engines : 8HX - 8HW
8HX - 8HW TR PSA K213
Engine types
(1)
Catalytic converter
(2)
Clip
(3)
Intermediate pipe
(4)
Rear silencer
Tighten to 2,5 ± 0,3
Tighten to 1,5 ± 0,1
PSA 4177
ENGINE
Repair
Respect the precautions to be taken when operating on a
vehicle.
The flexible pipe must not come into contact with corrosi-
ve products.
Do not distort the flexible pipe by more than 20° angular
(X), 20 mm axial, 25 mm shear (Y) (flexible pipe not fitted).
Do not distort the flexible pipe by more than 3° angular (X),
0 mm axial, 3 mm shear (Y) (flexible pipe in place).
WARNING : Non-respect for these precautions will result
in a reduction in the lifetime of the flexible pipe. It is thus
essential to disconnect or remove the exhaust line in any
operation necessitating the lifting of the power unit.
B1JP03PD B1JP02JC