12 NX501E/NZ501E
English
Owner’s Manual
[ , ] Buttons
• Press to search previous or next station or channel
in Tuner modes.
• Press to search previous or next track or chapter in
CD, MP3/WMA, iPod and DVD video modes.
• Press and hold to fast forward or fast backward by
2x, 4x, 8x or 16x step in CD, MP3/WMA and DVD
video mode.
• Press and hold to fast forward or fast backward in
iPod music.
• Press and hold to enter manual seek status in Tuner
mode, then press briefly to seek station by step.
[
] Button
• Press to play, pause or scan audio or video.
• Press shortly to scan.
• Press and hold one time Audio or video file will be
paused, if then press briefly, file will be resumed to
play.
[+][-] Buttons
• Press to Increase and decrease volume.
[OPEN] Button
• Use this button to open/close TFT panel.
[MENU/PWR] Button
• Press this button to display main menu, press again
to return current source.
• Press this button to turn on the power.
• Keep pressing this knob more than 2 second to turn
off the power
[BAND/END PS] Button
• Press this button to enter AM/FM tuner mode from
any source.
• Once in AM/FM tuner mode, you can press it to
change bands between FM1, FM2, FM3, AM bands.
• Press to stop Preset Scan.
[ISR/SEND] Button
ISR Function:
When in tuner mode, press and hold this button for
3 seconds to save current station and band to ISR
memory, and at the same time, the tuner will enter ISR
mode with current station.
Note:
In ISR mode, the tuning operation is disabled. Press this
button again to quit ISR mode.
When in the other mode but not tuner mode, press
this key will go to ISR memory station directly, it likes
a shortcut. Press this key again to go back to previous
mode.
SEND Function:
Only be available when there is a coming call. Press
this key to accept the coming call or end a call.
[IR] SENSOR
• Receiver for the remote control unit (operating
range: 30 degree in all directions).
To Next Page
Loading...
Need help?
General
