Clevo Notebook User Manual

4 - 8
User’s Manual
4
C: Setting the SW6 Jumper Switch
1) Turn off the computer.
2) Remove the keyboard by pressing the 4 latches at the top (figure 4-8) and
gently lifting it out of the notebook.
3) Place the keyboard as shown
(figure 4-9).
figure 4-8
figure 4-9
1
1. SW6 jumper switch
Note
Step C is only
necessary if your
new memory
module is a differ-
ent type than
your previous one.
If the previous
memory module
was a PC-100
and the new
module is a PC-
133 or vice-versa,
then you must
proceed with
Step C. Other-
wise skip this
Step.

Clevo Notebook Specifications

General

Brand	Clevo
Model	Notebook
Category	Laptop
Language	English