InteliMains 210 Global Guide
49
Image 5.11 Second screen of InteliConfig - select AirGate
Connection using WinScope
WinScope doesn't support connection via AirGate.
5.2.4 Firmware upgrade
Firmware upgrade is provided through InteliConfig pc software. For more information please download the
manual from websites.
https://www.comap-control.com/products/detail/inteliconfig
Firmware upgrade in IG200 hardware
IMPORTANT: InteliMains 210 firmware is possible to use also with InteliGen 200 hardware. But
because there are some important differences between both hardwares, please pay always attention
by configuration of InteliMains 210.
The main issue is based on Binary outputs on InteliGen 200.
To Next Page
Loading...
Need help?
General
